NOW GET FREE SHIPPING WITHIN THE CONTINENTAL USA, AND DISCOUNTED SHIPPING TO ELSEWHERE IN THE WORLD!
NOW YOU CAN BE PART OF THE HOTTEST TREND IN AMERICA... CUSTOM-COLORED, "CONCRETE" COUNTER TOPS, WALL STONE, AND FLOOR TILE... BUT WITHOUT PAYING THE EXTREMELY HIGH RETAIL COST! WHY PAY $8.00-$12.00+ PER SQUARE FOOT AND MORE FOR CUSTOM, HANDMADE, STONE AND TILE? WE TEACH YOU HOW TO MAKE THIS HAND-CRAFTED STONE WITH OUR FREE INSTRUCTIONS AND MOLDS. MAKE REAL-LOOKING STONE LIKE THAT PICTURED... FREESTANDING WALLS, PAVERS, OR STONE VENEER WITH THESE MOLDS...
WE TELL YOU HOW!
The "HOW TO" process is so simple... virtually anyone can do it!
It's like making a cake! But no oven is needed!
HERE'S HOW...
1. Lubricate the molds... a light vegetable oil will do if you don't have mold release.
2. Mix a bag of pre-mix concrete… get a shovel, water, and something to mix it in.
3. Add some concrete color, which is optional… unless you want just plain gray.
4. Pour mix into molds… vibrate a bit to compact concrete and release air bubbles.
5. Let the filled molds sit a day or so, undisturbed… over-night is fine.
6. Carefully flip the molds over the next day… and pop out what you’ve created from the mold!
That is obviously a simplified version of the process, but it is that easy. And FREE instructions and email support are included with each purchase.
We are proud to say that ALL of our products and the raw materials used in them, are MADE IN THE USA
Our molds are designed and manufactured by us in Florida since 1992!
THE BEAUTIFUL FIREPLACE SHOWN IN OUR PHOTO WAS MADE BY TIM McCLELLAND, ANER JUST LIKE YOU, WITH NO PREVIOUS EXPERIENCE MAKING STONE! HE NOT ONLY BUILT THE FIREPLACE... HE MADE THE STONE USING OUR MOLDS AND INSTRUCTIONS!!!
SAVE BIG $$$$ - MAKE THEM FOR AS LITTLE AS $0.35 A SQUARE FOOT!
We've made two pallets of our "Castle Stone" with three bags of Portland cement, (about $7.50 per bag), that equals just over 112 square feet of lightweight stone. You will get similar results with our "Olde Appalachian Fieldstone" molds.
AND YOU CAN START PRODUCING NEXT WEEK!
WHETHER YOU WANT THE FREEDOM AND INDEPENDENCE OF YOUR OWN BUSINESS... OR JUST WANT TO MAKE TILE AND STONE FOR YOUR OWN USE... WE ARE THE SOURCE!
YOU ARE PURCHASING A SHEET OF #OAF-03, TWELVE (12) DIFFERENT, "OLDE APPALACHIAN FIELDSTONE" CONCRETE MOLDS, (Totals 7 +/- Sq. Ft.).
The twelve mold sizes are as follows: 2x7, 4x7, 5x6, 5x7, 6x6, 7x9, 7x11, 7x14, 8x9, 8x10, 9x10, and 10x11. Molds were measured at their furthest points in both directions. Sizes are therefore approximate and were rounded off to the nearest full inch. The mold sheets are 28"x36" equaling about 7 sq. ft. of stone per sheet, and the molds will be cut from the master sheet prior to shipping. FREE Shipping within the Continental USA.
YOU CAN MAKE CUSTOM-COLORED, HEAVY, MEDIUM, OR LIGHT-WEIGHT STONE WITH THESE. MAKE THICK STEPPING STONES, WALLS, OR THINNER STONE FOR FLOORING OR VENEER... DEPENDING ON THE THICKNESS YOU POUR THEM. THESE MOLDS ARE BETWEEN 1-1/2" TO 2-1/2" THICK.
Complete FREE instructions on how to make the stone are included!
You get twelve (12) molds that make a natural 7+/- sq. ft. pattern. Add our other OAF Sheets, (available in our Store), to get an even better "mix" of stones for larger areas.
We also make many other sizes of Olde Appalachian Fieldstone molds that are approximately 1-1/2" to 2-1/2" thick, and will blend with these perfectly for walls, walks, etc... The fireplace photo in this listing includes stone made with molds from this and other OAF sets as well.
PURCHASE ALL FIVE SETS OF OLDE APPALACHIAN FIELDSTONE IN OUR STORE FOR ONLY $475.00...
AND YOU SAVE MORE $... AND GET FREE SHIPPING!
Either order it from our Store as "Olde Appalachian Fieldstone Set of Five"...
or email us if you have any questions.
These molds can be used hundreds of times if cared for properly. They are made with .060, high-impact, industrial rubberized ABS plastic, for strength, durability, and flexability.
Interested in starting your own business?
Become an "Olde World Stone & Tile" Producer!
Since 1992, we've trained hundreds of entrepreneurs worldwide to start and succeed in their own tile and stone manufacturing businesses! Our business is mold design and manufacturing, so our success is truly dependent on your success!
SEE OUR OTHER LISTINGS, OR VISIT OUR NEW STORE, FOR MORE MOLD STYLES AND SIZES, AND FOR MORE INFORMATION ABOUT OUR BUSINESS OPPORTUNITY PACKAGES.
For additional product information, tile and stone installation photos, and more... visit our extensive TheMoldStore.com and Oldeworld.com websites, or if you have questions, feel free to call or email us.
#OAF-03 Fieldstone Concrete Molds (12) Makes 100s of Garden Patio or Wall Stones added to cart.
41 available in stock
Please wait while we finish adding this item to your cart.
